- 1). Access the tail light assembly. Open the trunk and look for the access panel behind the tail light. Turn the clips that hold it in place and open the panel.
- 2). Turn the retaining clips on the sides of the bulb holder. Pull the holder out.
- 3). Push the bulb in while rotating to the left, or counterclockwise. Remove the bulb.
- 4). Put in the new bulb by pushing it in slightly and rotating clockwise, or to the right. A clicking noise or the inability to turn any longer signals that it is locked.
- 5). Push the bulb holder out and turn the retaining clips back so that the holder is secure. The tabs will snap into place.
- 6). Close the access panel and turn the retaining clips to secure the panel in place. Close the trunk and test the lights.
previous post
next post