- 1). Purchase a rear-window defogger repair kit from an auto repair store. Most kits should work on all automobiles. Ask for assistance at the store if you have questions.
- 2). Find the electrical tabs around the edge of your Mitsubishi Galant model's rear window. Determine if the tabs or wires are broken. If they are, then remove them.
- 3). Remove the sandpaper, which can be found in your defogger repair kit. Lightly sand the tab. Clean the contact area and the tab with the alcohol preparation, which is also in the kit.
- 4). Treat both parts with the activator. Make sure to let the area dry for 2 minutes. Massage the packet of adhesive, also in the kit, and dab the contents onto the tab. Tape or hold the tab on the grid until you no longer need to apply pressure. You must wait at least 24 hours before you use your defogger.
- 5). Look at the grid of your defogger for breaks in the grid lines. If you find one, clean it with the alcohol to prepare for the repair.
- 6). Let the alcohol dry. Use the stencil from the kit to apply conducting paint to the grid line. Wait for it to dry, allowing at least 24 hours, before you use your defogger.
previous post