- 1). Remove the headlight housing from the frame of the vehicle. Disconnect the wiring harness from the rear of the headlight and place the headlight housing on a flat surface.
- 2). Drill a hole slightly bigger that the strobe light bulb using the power drill and drill bit. Place the rubber seal around the edge of the hole to seal it.
- 3). Insert the strobe light into the hole and connect the wires to the light. Guide the wires to the transformer and connect them according to the manufacturer's instructions.
- 4). Guide the wires from the transformer to the control box and connect the wires. Turn on the control box to ensure the strobe light is working.
- 5). Replace the headlight to the frame and connect the wiring harness to the headlight. Repeat for any other strobe light that you want to install on your vehicle.
previous post
next post