- 1). Press the power switch at the back of the printer to turn it off.
- 2). Press the cover release buttons on either side of the button.
- 3). Pull forward, keeping your fingers in the button slots.
- 4). Lift upward to open the printer.
- 5). Remove the paper roll's outer layer.
- 6). Pull apart the roll holders within the printer.
- 7). Insert the roll between the holders, positioning it so the paper rolls off the top of the roll.
- 8). Release the holders, letting them fix the roll in place.
- 9). Thread the top sheet through the media guides -- sliding components shaped like brackets.
- 10
Press the media guide knob to the side of the media guide on the right, releasing the guides. - 11
Slide the media guides, pressing them tight against the sheet. - 12
Close the printer's cover. - 13
Holding down the feed button on the right of the front on the printer, press the printer's on-switch. The indicator light near the feed button will flash. - 14
Release the feed button.
previous post
next post