Windsor Knot

• 1). Place the tie around the back of the neck with the wide side on the front right portion of the chest and the skinny side on the front left portion of the chest. The wide portion should hang 1 foot below the skinny portion.
  
  
• 2). Cross the wide end over the narrow end and bring it up behind and through the area where the two ends crossed.
  
  
• 3). Wrap the wide end behind the narrow end and up to the right.
  
  
• 4). Fold the wide end through the created loop and across the face of the narrow end.
  
  
• 5). Turn the wide end up and through the neck loop.
  
  
• 6). Finish the knot by sliding the wide end down through the knot in the front.
  
  
• 7). Pull the wide end down to tighten the knot.
  
  

Half-Windsor Knot

• 1). Put the tie around the back of the neck with the wide side on the front right portion of the chest and the skinny side on the front left portion of the chest. The wide portion should hang 1 foot below the skinny portion.
  
  
• 2). Cross the wide end over the narrow end and then back to its original side.
  
  
• 3). Wrap the wide end up and down through the neck loop.
  
  
• 4). Turn the wide end across the front of the thin end from left to right.
  
  
• 5). Bring the wide end up through the loop and down through the knot in the front to finish the knot.
  
  
• 6). Pull the wide end down to tighten the knot.