- 1). Place the cartridge on paper towels. The ink in inkjet cartridges is very hard to wipe off or wash.
- 2). Remove the sticker on the top of the cartridge to expose the filling hole. Fill the syringe from your ink refill kit with 15 ml of ink. If you are using an ink bottle with a needle cap, you will not have to perform this step.
- 3). Insert the syringe needle into the filling hole and slowly push the ink into the sponge. If you are using an ink bottle with a needle cap, squeeze the bottle very gently to force ink into the sponge. Once the sponge appears moist, stop filling.
- 4). Wipe the filling hole and printer head with the paper towels to remove any excess ink.
- 5). Put the ink cartridges back into the printer. Do not reapply the sticker.
previous post