Cars & Vehicles Car Audio

How to Install a Stereo in a Pontiac Grand Am

    • 1). Disconnect the negative battery cable from under the hood. Ensure it doesn't touch any metal parts.

    • 2). Locate and remove the two screws at the back of the storage pocket below the radio. Look under the instrument panel and remove the two screws securing it in place.

    • 3). Pull the dash panel away carefully and disconnect the wire emergency flasher switch. Pull the entire panel out and set it aside.

    • 4). Find the three screws holding the stereo to the Pontiac Grand Am dash and remove them. Pull the head unit straight out of the dash and disconnect the wires behind the radio.

    • 5). Connect the wiring harness adaptor to the original harness and the GM antenna adaptor onto the antenna wire. Secure the new stereo into the GM radio mounting kit and plug the wiring harness adaptor and antenna wire into the back of the stereo.

    • 6). Push the entire assembly into the dash and reconnect the negative battery cable. Turn the radio on and verify the speakers and controls are working properly. Secure the head unit into the dash with the three original screws and replace the trim, remembering to reconnect the emergency flasher wire.

Related posts "Cars & Vehicles : Car Audio"

How to Install a Radio in Mazda Millenia

Car Audio

How to Install a Car Sound Box to a Home Theater

Car Audio

Car Radio Installation Part 5 - Answers To Common Radio Installation Questions

Car Audio

Car DVD Players - A Few Things to Remember

Car Audio

Should You Get Cheap Car Amps Or Expensive Ones?

Car Audio

How to Install a Car Alarm in a Hyundai Santa Fe

Car Audio

How to Install a Stereo in a Pontiac Grand Am

Car Audio

How to Connect a Car Alarm System

Car Audio

How to Get the Radio Out of a Saab 9-3

Car Audio

Leave a Comment