- 1). Hold the lens so you can view the rear portion of the lens and mounting ring that connects to the camera. Locate the small Phillips screws in the rear of the lens. Most lenses will have four of these screws.
- 2). Unscrew the Phillips screws using a small jeweler's screwdriver. Set the screws aside.
- 3). Carefully lift off the mounting ring from the lens. If your lens is autofocus or a new lens that works through electronic contacts, look for a wiring harness that will be connected to the mounting ring. Use a pair of tweezers to disconnect this harness. Remove the mounting ring and set aside.
- 4). Unscrew the small Phillips screws on the side of the lens barrel. There are usually two of these screws. Longer telephoto lenses may have two sets of these screws, one set toward the front, and another set toward the rear of the lens. Remove the screws and set them aside.
- 5). Hold the lens in both hands, and gently pull apart. Some lenses may have an external ring at the front of lens that will need to be removed; this will become apparent as you take apart the lens.
- 6). Remove the internal lens and electronic elements from inside the lens by either removing the screws or prying apart the elements.
previous post