- 1). Insert the ignition key into the seat-lock mechanism under the left side of the seat. Turn the key counterclockwise to unlock the rider's seat and lift the rear of the seat upwards to access the storage compartment.
- 2). Locate the battery box at the front of the storage compartment. Using a Phillips screwdriver, unscrew all three bolts that secure the battery box cover. Pull the red positive (+) lead and the black negative (-) lead out of the battery box and set them aside.
- 3). Insert a fully charged battery into the battery box. Connect the red positive (+) lead to the battery's positive (+) terminal, inserting and tightening the terminal bolt with a Phillips screwdriver. Connect the black negative (-) lead to the battery's negative (-) terminal, inserting and tightening the terminal bolt with a Phillips screwdriver.
- 4). Place the battery-box cover over the battery. Insert and tighten the battery-box cover bolts with a Phillips screwdriver. Lower the rider's seat over the storage compartment. Press the seat down firmly to engage the seat lock mechanism and remove the ignition key.
previous post