Foam Roof Insulation

Insulating your roof will be more effective with a material called polyurethane, which starts as a liquid when sprayed on the roofs surface and turns into a solid layer of protection. By doing this, roof leaks and holes are prevented, and an added protection against extreme heat and cold is attained. A quality that makes this insulation material a favorite among users is the fact that it is easily applied to any roof surface and size to give it a longer working life span. Furthermore, this form of insulation does not need any maintenance and is far more effective that any other roof insulation method. Another reason is the fact that roof sprayed with polyurethane can take two hundred miles per hour winds, which is an amount two times higher than what fiberglass roof insulation can withstand. In the end, to get the cheapest and easiest way to insulate your roof, polyurethane foam spray is your answer for the lowest electricity bills ever.

Sunroom Insulation: The Benefits

When proper insulation is installed in sunroom, you will get the perfect flow of hot or cold air which will truly promote comfort in your room. To get insulation, you have to attach wooden frames in the walls, floors, and ceiling of your sunroom and enclose the area to maintain your desired temperature. To maximize the positive effects of this form of insulation, the walls must be installed with two or more vapor retarders. Also, you can pay a professional installer to make sure that all the insulators are properly installed and will work properly. If you plan to install four season sunroom insulation, keep in mind that its effects will be limited during summer and spring season. Before acquiring insulation, you must first make sure if you really need a three season or four season sunroom insulation to cut down on labor and insulation costs while creating a more energy efficient home.

Attic Insulation for Warmer Homes

Nowadays, any energy saving method becomes more important as the price of electricity continues to go up. One way to realize this in houses with cold temperature is preventing the loss of heat, which usually happens in the attic. To avoid heat loss, you need to install insulation boards in your attic walls. However, this form of insulation is useless during cold season because it can not prevent the rising of hot air, which usually exits in the attic. As a solution, you can install multiple layers of boards in the wall, which will certainly occupy more attic space and may even lead to excessive absorption of moisture. To resolve these issues, you must use a radiant barrier that works as a heat deflector during hot seasons, while allowing heat flow inside your home when cold season comes.

Steps for Effective Basement Insulation

In order to have an effective basement insulation, many problems that affect the overall condition of your basement such as leaks and molds must first be resolved. When these problems are resolved, the next thing to determine is the form of insulation that will perfectly fit your basement. One of the most preferred materials used in this form of insulation is fiberglass, which is easily availed in bats or rolls in most hardware shops. These rolls are packed in bags that have been pre cut in lengths of 8 feet, or may be purchased in longer lengths of 40 feet which carries a lower price tag. But before going on with the project, one vital thing that must be cleared is the correct construction code of your basement because different parts of the basement carry a corresponding code. After determining the code, the next step is to put the fiberglass and other insulation materials between the basement walls. To make sure it perfectly fits, cut it down while making sure it will not touch the concrete wall.