- 1). Lift one end of an adhesive strip by picking it loose with a fingernail or plastic scraper. Work around the strip loosening all the edges. Repeat for all adhesive strips.
- 2). Spray an adhesive remover under the lifted edges of the strips and over the top. Allow the remover to work on the strips for 30 minutes.
- 3). Grab one end of a strip and slowly pull it up. Push under the strip with your fingernail or the scraper as you pull the strip away from the bathtub. Repeat for all adhesive strips.
- 4). Spray adhesive remover on any adhesive remaining on the tub. Allow it to sit on the surface for 10 minutes. Scrub the adhesive with a wet nylon scrubber. Rinse the adhesive particles and remover down the bathtub drain. Dry the bathtub with a clean towel.
previous post
next post