- 1). Weight out about 3.5 grams of solid sodium nitrite on a balance and transfer it to a small cup or flask. Add about 50 mL of water to the flask or cup and swirl or stir the contents until the sodium nitrite completely dissolves. Transfer the solution to a 100-mL graduated cylinder and then add water to a final volume of 100 mL. Transfer the solution to an empty 16- or 20-ounce plastic bottle, which will serve as the reaction vessel.
- 2). Weight out about 4.0 grams of solid sulfamic acid and set it aside.
- 3). Prepare to start the reaction by having a balloon ready to place over the opening of the bottle as soon as you add the sulfamic acid. Then, in a well-ventilated area, position the bottle upright, quickly add the sulfamic acid to the bottle and immediately snap a balloon over the bottle's opening. The generation of nitrogen gas should begin immediately.
- 4). Monitor the reaction closely to ensure that the balloon does not overinflate and pop off the bottle. Do not, however, at any time point the bottle toward yourself or another person. When the balloon stops inflating, or if the balloon appear to be fully inflated, pinch the balloon at the neck and remove it from the bottle. The balloon contains nitrogen gas with a trace of air.
- 5). Neutralize the sulfamic acid and sodium nitrite solution by adding baking soda (sodium bicarbonate) to the bottle until it no longer evolves gas, then dispose of the solution down a drain. Rinse all glassware and apparatus with a sodium bicarbonate solution and then rinse them thoroughly or, in the case of the plastic bottle, throw them away.