- 1). Measure the complete room dimensions as described in the plan for creating a new room frame or improvement on an existing wood-framed room. Measuring to exact dimensions will ensure that you build your wood-frame room to the appropriate size. After you determine the measurement of the wood frame to be built, measure it again. Write down the numbers where you can refer to them regularly when needed. Remember that any variations will create a room frame that is out of square and will result in defective construction.
- 2). Arrange 2 X 4 lumber in a shape that mirrors your first new wall. Use treated lumber for the floor plate, and two pieces of untreated 2 X 4 lumber at the top plates. Make the needed cuts, using your measurements. Remember: When you measure the height of the room for the vertical 2 X 4 studs, subtract the existing floor plate, and two top-plate widths of 2 X 4. Do not cut your vertical studs too long because you forgot to deduct these widths or your room wall will be too big.
- 3). Nail all the components of your new wall together. Because you have measured correctly, the top and floor plates combined with vertical studs will fit perfectly into the space designated for the room. Nail each wall frame so that it is securely connected among all it parts and will maintain its strength.
- 4). Raise the wall from the top plate, and stand it up in the correct wall position of the room. Lay a thin chalk line on the floor so you nail the treated floor plate into the correct position. Once you know the measurements are correct, and the wall is where it is supposed to be, nail it to the floor using your concrete nails.
- 5). Connect the new wood-framed walls together in an overlay pattern like a house of cards. Butt each new wall up against the inside of the existing raised wall and when you have completed this process of measuring, cutting, nailing, raising and connecting, you will find that your new wood-framed room is complete. Once all the connections have been made, you can continue with insulation and Sheetrock. if needed. For any doors or windows you may need to include, be sure to check with the manufacturer's recommendations for additional framing requirements.
previous post