- 1). Lie the poster down on a surface upside down, so that the side that attaches to the wall faces upward.
- 2). Attach pieces of clear box tape to the top left corner, being careful not to apply it over the edges. You will need to attach three pieces of around 2 or 3 inches, attached next to each other to form a see-through square in the corner.
- 3). Repeat for the rest of the corners, again being careful not to place the tape too close to the edges.
- 4). Stick a piece of see through tape along the top of the poster, in the middle. Repeat at the bottom. This helps to provide extra support, and is vital for heavy posters. Lighter posters may not need this.
- 5). Cut a 1-inch piece of see-through box sealing tape, and bend it backward to form a loop. The sticky part of the tape should be facing outward.
- 6). Attach the loop to the top left corner, sticking it onto the clear square you made earlier.
- 7). Repeat for the rest of the corners.
- 8). Attach smaller loops to the lines of tape along the top and bottom. These loops will need to be horizontal, so that they fit completely on the tape line and do not touch the poster.
- 9). Push the poster onto the wall, holding each corner for a few minutes to ensure it is has fully attached.
previous post