- 1). Disconnect the dishwasher's power supply by turning off the breaker in your home's main service panel.
- 2). Open the dishwasher door and remove the screws around the perimeter of the inner door panel, which secure the front panel of the dishwasher to the dishwasher door.
- 3). Close the dishwasher door and remove the front panel of the dishwasher.
- 4). Open the dishwasher door and pull the short seal out of the slot below the inner door panel.
- 5). Insert the new short seal into the slot, with the lip facing down.
- 6). Close the dishwasher door, and then look at the bottom of the door panel. Ensure that the seal is installed evenly, and adjust as needed.
- 7). Reinstall the front panel of the dishwasher door, using the screws that were removed from the inner panel to secure it into position.
- 8). Close the dishwasher door and restore the dishwasher's power source by turning on the breaker in your service panel.
previous post
next post