- 1). Make sure the time is properly set on the clock of the iHome. To adjust the time press and hold the clock adjust button located on the back of the unit until the display flashes. Then press the up or down buttons to reach the proper time. To finalize the time press the clock adjust button.
- 2). Place your iPod in the iHome's dock and make sure it is properly connected and not in play mode. If the iPod is not off when docked then it will not be used for an alarm sound.
- 3). Press and hold the alarm set button until the display flashes and then press the up or down button till the desired alarm time is selected. Also, note if the PM indicator is displayed. If it is not displayed then the time is set for AM.
- 4). Press the mode button to select your iPod as the alarm sound option. The other modes available are radio and buzzer. What source is currently selected is shown by the icon flashing on the display.
- 5). Press the alarm set button again and two beeps will sound to confirm the alarm has been set. The alarm icon will present on the display to indicate the alarm is set.
- 6). Press the snooze/dimmer button to silence the alarm for nine minutes, or press the alarm reset/power button to turn off the alarm. Your alarm will sound daily at the same time unless you turn off the feature or change the alarm time.
next post