- 1). Remove everything from the top of the table. Pull off any linens or towels that have been used to cover the table. These items should be replaced after each use.
- 2). Inspect the massage table. Look for cracks in the vinyl covering of the table padding. Cracks in the padding allow germs and fluids to enter the padding -- any affected padding should be replaced immediately. Check for loose or frayed cables on electric tables.
- 3). Place a few drops of a mild detergent soap into a spray bottle. Fill the bottle with water. This cleansing solution will eliminate bacteria left on the surface of the bed while also protecting the surface of the vinyl. Repeated cleanings with harsh chemical cleansers will cause the vinyl to break down. Commercially prepared vinyl cleaners are available in stores. Refer to your owner's manual for recommendations from your table's manufacturer.
- 4). Spray the cleaning solution over all of the vinyl surfaces of the table. Pay special attention to any crevices in the bed. Crevices are prime hiding spots for dirt, germs, hair and other undesirable things.
- 5). Use a paper towel to wipe the surface of the table.
- 6). Wipe the table with a paper towel that has been moistened with water to remove any soapy residue that is left behind. Dry the vinyl upholstery with a lint-free cloth.
- 7). Dilute a mild commercial cleaner with water at a 4 to 1 ratio. Pour the mixture into a spray bottle.
- 8). Spray the solution onto a dampened lint-free cloth. Wipe the legs and base of the table.
previous post
next post