Water is one of the most important essentials required for various purposes. But mostly, water is used for drinking and drinking water should be free from impurities and disinfectants. Hence, most of the people desire to have water at home that contains chlorine in it.

It is often seen that most of the people wish to have chlorinated water at their home instead of the well because it is a common belief that well water would contain large amounts of iron, bacteria, and other nutrients which may or may not be harmful to the body. To have chlorinated water at home, Proportional Feed Chlorinator is apt for such situations as they can be easily installed at home instead of well that too without any kind of special wiring.

Let's understand how the Proportional Feed Chlorinator actually works. When the water is turned on in home, the water meter flow sensor gets activated. The sensor motions are passed on to the chlorinator pump which in turn, turns on the pump in a pre-defined amount of chlorine according to the rate of flow of water. Once this process is over, the water then flows through a tank known as the contact retention tank under certain pressure. While this process is conducted, the released chlorine kills the entire bacteria, manganese, oxidized iron and even eliminates the odour present in the water. The water then passes on to the MangOX iron filter where manganese, iron, and sediments are cleaned out. Organic matter, chlorine taste and its smell is then cleaned by carbon backwash filter. In case the water is too hard, the water then finally is softened by the softener which becomes apt for laundry and bathing. There are no more undissolved salts left in the water hence, the problem of accumulation of these undissolved salts in fixtures and pipes is eliminated completely. The final obtained water is odour-free, clean, disinfected and fresh water in the entire home.

Such an effective system has no additional maintenance cost of cartridge costs. The only thing one needs to take care of is to add some amounts of chlorine bleach to the tank of the solution after every 3-4 months. Any basic plumber can come to your home and install it very easily.

To eliminate bacteria and odours of water, chlorine is the best, safe, and low-cost method. It works simply great in oxidizing manganese, iron, and other contaminants present in water so that they all can be easily filtered and you obtain safe and pure water for daily use. Chlorination is often coupled with filtration to obtain clean and fresh water by clearing out contaminants, bacteria, water odours, and other harmful metals.

The entire chlorination system is a highly cost-effective method. Besides, the results obtained are dependable and worth installing. The installation of this system is also very easy. Any ordinary plumber can arrive at your residential place to install this system with some easily obtainable plumbing supplies.