- 1). Draw a rectangle, 2.25 inches wide and .25 inches tall. This is the body of the car.
- 2). Draw an isosceles trapezoid on top of the body of the car. The base of the isosceles trapezoid should be .75 inches wide, and the top should be .5 inches wide. The base of the isosceles trapezoid should be flush with the top of the rectangle you drew in step 1. The trapezoid will be located just slightly off center on the rectangle, so that it sits .5 inches from the far left of the rectangle and .75 inches from the far right. This trapezoid is the cab of the car.
- 3). Draw a smaller isosceles trapezoid centered inside the larger isosceles trapezoid you drew in step 2. This is the driver's side window.
- 4). Draw a vertical line straight down from the lower left corner of the trapezoid, to the base of the rectangle you drew in step 1. This is one side of the door.
- 5). Draw a vertical line straight down from the lower right corner of the trapezoid, to the base of the rectangle you drew in step 1. This is the other side of the door.
- 6). Draw a tire by drawing a circle with a diameter of .25 inches, located just in front of the door. Draw a second tire by drawing a circle with a diameter of .25 inches, located just in back of the door. The tires will be half above and half below the bottom side of the car.
- 7). Shade the wheels black, but leave a white circle centered inside (to represent the hub caps).
previous post
next post