- 1). Open up the door of your Buick which you want to install the regulator on to. Locate the screws which are attached to the door panel. Some of them may be covered by plastic connectors which you will have to remove to gain access to the screws.
- 2). Use a phillips-head screwdriver to remove the screws which are fixed to the door panel. Pull the door panel away from the door to gain access to the door frame where you will attach the window regulator.
- 3). Place the regulator just below the window frame so that the regulator can easily align with the window. Fix the regulator in place by attaching the lower mounting bolts to the bracket of the regulator.
- 4). Line up the bolt holes on the regulator with those on the glass window. Use a hex wrench to insert the hex bolts between them both, which will secure them firmly in place.
- 5). Follow the removal process in reverse to reattach the door panel on to your Buick.
previous post