- 1). Insert the headset into either the USB port, which Windows automatically detects, or the microphone and earphone jacks of your PC. You can find these ports in the front or back of your system.
- 2). Adjust the volume control of your headset, if available, so it is halfway between the minimum and maximum. Turn off the computer speakers to avoid any feedback.
- 3). Put on your headset, making sure it is positioned comfortably over your ears. Position the mic either an inch in front of your mouth, or closer to one side, depending on the model.
- 4). Click the "Start" button and go to the Control Panel to show its window. Double-click "Sounds and Audio Devices" to display the dialog box.
- 5). Choose the "Volume" tab and drag the "Device Volume" slider to the halfway point. Ensure that the "Mute" checkbox is blank. If needed, click the "Advanced" button to display the "Play Control" dialog box and further adjust the volume control and speaker balance.
- 6). Choose the "Audio" tab and click the correct microphone input in the "Sound Recording" dropdown. Look for the name of your sound card input, if using the mic jack, or the name of the microphone, if using a USB port. If sounds are not recording, select different options. Repeat the process for the "Sound Playback" dropdown.
- 7). Choose the "Voice" tab and repeat the same process for the "Voice Playback" and "Voice Recording" dropdowns.
- 8). Click "OK" to close the dialog box and save your changes.
- 1). Click the "Start" button, "All Programs," "Accessories," "Entertainment" and finally "Sound Recorder" to display the Sound Recorder dialog box.
- 2). Choose the "Record" button and talk into the microphone for about 10 seconds. Your speaking should make jagged points appear on the waveform line. Choose the "Stop" button.
- 3). Choose the "Play" button and listen to your voice. For the best sound, you may need to re-adjust the volume on your headset or through the "Sounds and Audio Devices" dialog box.
previous post