- 1). Cut four pieces of wood to the following measurements: 1 1/2-inch, 3 1/2-inch and 3 1/2-foot.
- 2). Cut two pieces of wood to the following measurements: 1 1/2-inch, 3 1/2-inch and 3-feet. Attach one of these pieces to two of the pieces in step 1 by the middle with screws. Do the same with the remaining three pieces. You get two legs for the table saw.
- 3). Cut two pieces of wood to the following measurements: 1 1/2-inch, 3 1/2-inch and 2-feet. Use these pieces to attach the two legs from Step 2 by the middle. Secure everything with screws. The result will look like a table without the board, just four sticks secured among them standing still.
- 4). Build a board. For this, take a 1/2-inch thick wooden board and cut it so it becomes a 4-feet square board. Cut a small opening in the center of the board. This rectangle should be 2-inch by 12-inch, this is where the saw will rotate.
- 5). Place the circular saw on the underside of the board from step 4. The blade should look through the opening of the board. Use 1/2-inch screws to secure the saw to the board.
- 6). Use thick screws to securely attach the board to the legs. Plug in the saw and cut as desired.
previous post