- 1). Check to make sure that the mute function isn't activated. Turn the volume up a bit to make sure it isn't turned all the way down.
- 2). Check your source. First, make sure that the receiver is switched to the source that you're trying to play. If it is, try switching to and playing another source. If that plays, you know there's a problem with your first source. Check the connections and replace the cable, if needed. Also, try using a different set of connection terminals on the stereo receiver. If nothing works, you should contact the manufacturer of the source component or replace it.
- 3). Check the speaker settings. If you don't get any sound when switching sources, check your speaker settings. Look at your receiver and make sure that the speakers are selected. Many receivers have an "A" and "B" speaker selection, so be sure that the appropriate button is pushed. Also, make sure that the volume on the speakers is turned up appropriately in your receiver's menu.
- 4). Check speaker connections. Verify that all your speakers are properly connected and polarities aligned. Check both the receiver and the speakers. Tighten down any loose connections. Look closely at the terminals to see if there are any loose wire strands sticking out that may be causing a short. Check your speaker cable for any damage or corrosion and replace the cable.
- 5). Determine whether you have a receiver or speaker issue. If both speakers aren't working, there's a good chance it's the receiver causing the problem. To test, get a second pair of speakers and connect in place of the problem pair, using the same terminals on the receiver. If these don't work, you know you have a receiver problem. Check your receiver's owner's manual for any suggestions or possible problems.
Try unplugging the receiver, allowing it to sit and then plugging back in. Also try plugging in a pair of headphones or other line-level component such as a subwoofer to see if the problem is with the amplifier in the receiver or something else. If all else fails, contact the manufacturer to discuss repair options. - 6). Contact your speaker manufacturer. If your test speakers work, there is a problem with your original speakers. Contact the manufacturer to discuss repair.
next post