- 1). Move your Frigidaire Affinity washer away from the wall, and then disconnect the power cord from the AC wall outlet.
- 2). Open the door, then use a screwdriver to remove the two screws from the door safety switch on the front panel.
- 3). Disconnect the wires from the light switch using needle-nose pliers. Close the door, then lift up the front panel slightly, to expose the four screws on the bottom.
- 4). Remove the four screws on the bottom of the front panel using a screwdriver.
- 5). Remove the four screws located at the top of the front panel. Lift up the front panel and remove it from the unit.
- 6). Inspect the front panel for any damages, and make any necessary internal repairs to the washer unit.
- 7). Place the front panel back onto the unit, then reinsert the four screws into the top portion of the front panel.
- 8). Reinsert the four screws back into the bottom portion of the front panel. Open the door and reconnect the wires to the light switch.
- 9). Reinsert the screws into the door safety switch, then close the door. Reconnect the power supply to the wall outlet.
previous post
next post