- 1). Connect all cables properly and securely in place. Double check that one of your coax or HDMI cables has one end connected to the "RF IN" input on the back of your set-top box and the other end connects to the FiOS TV wall outlet. Check your other coax or HDMI cables and ensure one end connects to the "TV/VCR" output on the back of your set-top box and the other end connects to the "Antennae", "Cable" or "A/V" input on the back of your TV. Your set-top box power cord also requires to be plugged into an outlet.
- 2). Press power on the front of your set-top box. If you see any prompt on the LED display of your set-top box other than "0," go to troubleshooting tips in your installation guide or call your Verizon customer service center; otherwise, continue to follow the instructions on your activation card in the Verizon installation guide.
- 3). Locate your personal equipment activation code on your packing slip, receipt or welcome letter. When prompted online or on the phone, you will need to enter your activation code, zip code and the number of set-top boxes you purchased as part of your account.
- 4
Once you activate your Verizon set-top box, you are ready for viewing.tv control and tv 3 image by chrisharvey from Fotolia.com
Go to the self-install section of the Verizon website or call the Verizon activation line listed on your activation card in your installation guide and follow the remaining instructions. It will take 20 to 45 minutes for your set-top box to activate and load the channels, during which time different numbers will flash on the LED display. When the clock appears with the time, your activation should be complete and you can turn on your TV and cable box for viewing.
previous post
next post