- 1). Slide your two toilet seat mounting bolts through the holes at the rear of your toilet base. These bolts are provided with your finished toilet seat and protrude downward from the underside of the seat at the rear to fasten the seat and cover to the toilet base below.
- 2). Slide a washer (provided) over the mounting bolt on the underside of the toilet base. Thread your two mounting nuts onto the mounting bolts at the underside of the toilet base by turning them in a clockwise direction.
- 3). Tighten the mounting nuts to the mounting bolts using your ratchet set and deep well socket. Tighten them all the way so the toilet seat is held tightly in position.
previous post