- 1). Cut a piece of cardboard into a christmas tree. You can make it as large or as small as you want. You can use small ones as ornaments and large ones as wall or window hangings. Draw on the tree where you want your garland, balls and a star to go.
- 2). Cut green tissue paper into 1 by 1-inch squares. Cut a few red, silver and blue squares to make balls and some gold squares to make garland and a star. Then cut a some brown squares for the trunk.
- 3). Put some glue on the top part of the cardboard. Only put enough glue on that you will be able to cover at a time or the glue will dry out before you get to it.
- 4). Press a pen cap into the center of a square and pull the paper up around it. Pull the paper off the cap and glue the point onto the cardboard. Do one at a time and change colors where you have drawn in the star, garland and balls. Repeat until the entire cardboard is covered. Allow the glue to dry for an hour.
- 5). Glue a loop of ribbon on the back of the tree. Use the loop to hang the tree.
previous post