- 1). Clear a large space in a well ventilated area such as a garage, barn or warehouse. Stain the plywood sheet with a wood stainer. Make sure you read the instructions on the bottle and allow for the recommended wait time for the stain to dry. Also stain the 2 by 4's for the leg supports at the same time.
- 2). Place the board on the ground on a covered area. Flip it so the bottom s face up. Place a 2 by 4 about 6 inches in from the corners. Screw the board in place with a screwdriver. Make sure to screw it in on all sides to ensure it is secure. Repeat with all four corners. Then create a skirt under the table with the 2 by 6 boards. Screw "L" brackets into the 2 by 6's to reinforce the table so as to prevent warping and evenly disperse the weight of the table.
- 3). Create a design for the table. This might be based on your favorite sports team, nickname or just an inside joke you and your friends have. Draw out the design on paper. Go to the store and find the correct colors of paint. You'll want to purchase spray paint for the main background color and the rest of the colors are up to you depending upon how much detailing and area you need to cover. You may also want to purchase stencils for decorating if you're not good with freehand painting.
- 4). Spray paint the main color of the table. Spray on several coats. Allow the paint to dry. Then begin painting and stenciling your design. Take you time to make sure it is perfect. After the design has dried apply a lacquer finish to the entire table. Let it set and apply a second layer; this will protect your design from the ensuing beer damage.
- 5). Set up the table for play. Place out a triangle as large as you would like of plastic cups on both sides of the table and fill each half way up with beer. Get out the ping pong balls and start the game.
previous post
next post