- 1). Charge the headset fully. Connect the small end of the power cord (which came with the headset) to the back of the headset, and then connect the other end to a power outlet. It will take two hours for the headset to charge completely.
- 2). Put the device you want to connect the Plantronics headset to in pairing mode. If you are trying to connect to a cell phone or PDA, you can enable pairing mode by going to the Bluetooth setup utility on your phone (see your owner's manual for specifics on how to access this utility). If you are connecting to a PC, enable pairing mode with the Bluetooth utility in the control panel.
- 3). Power on the headset by holding the power button for two seconds. The indicator light should flash red and blue, indicating that the headset is in pairing mode. If the indicator lights do not flash immediately, press and hold the power button for eight seconds.
- 4). Select the "Plantronics 220" headset from the list of devices in-range on the computer, cell phone, or PDA you are syncing it with. The headset should now be connected to the device.
previous post
next post